Genuine Joyetech 650mah USB passthrough Battery w/charging cable
Joyetech eGo-T 2 Upgrade USB passthrough has a built-in 650mah eG0-T battery and a USB port, which allows the user to vape during charging. The battery has "5-click protection" and generally, the battery is shipped in the off postion. In off position, the eGo-T will not function. To turn the battery on, press manual button 5 times within 2 seconds. You will see the white LED flash, which means it is on. To turn it back off, press manual button 5 times within 2 seconds, again you will see the LED flash telling you it is off. "5-click protection" can protect the battery from being activated when eGo is not in use.
Included items:
1 each Joyetech logo 650mah Joye eGo-T Upgrade USB passthrough
1 each USB Charging cable ( 5ft in length)
The biggest improvement of this battery (eGo-T 2) is it has two voltage modes. One is the constant voltage output mode which gives constant 3.3V and is the same as the normal eGo-T battery. The other is variable voltage output mode, in this mode; the voltage will change from 4.15V to 3.6V as the lithium battery power decrease.
It is easy to switch between output modes.
To switch from constant voltage output mode to higher voltage mode:
Switch battery to the off mode by clicking the button 5 times in 2 seconds (blue LED blinks 3 times).
- Press and hold the button for 5 seconds or until the LED changes to orange with 3 blinks.
The battery has switched to variable voltage output mode and the LED is orange while is use.
(You can still use the usual 5 clicks to turn it “on and off”) To switch from higher voltage mode back to constant voltage mode:
- Click the button 5 times within 2 seconds to turn it off.
Press and hold the button for 5 seconds or until the LED changes to blue with 3 blinks. - The mode has now switched back to 3.3V constant voltage mode.
(The 5 clicks on/off works as usual.)
